Block Paving Driveways Newcastle

Or Call: (020) xxxxxxxx

Block paving is a popular driveway surface. Block paving has several benefits over other driveway materials, such as gravel or concrete, including cost-effectiveness and durability. On the other hand, installing block paving may be difficult if you don’t know what you’re doing! In this post, we’ll look at how block paving firms use the proper approaches and equipment, who do the most of the work in your region, as well as some things to think about before getting block paving for your driveway.

Pavements are typically made of concrete or crushed rock that has been mixed with sand, cement, and water. The blocks are generally formed from concrete or crushed stone combined with sand, cement, and water. We may also include other components in blocks, including composite material for stability and durability, salt to lower the freezing point, and tiny pebbles to reduce weight.

Driveways, sidewalks, and verandas are all examples of places where concrete paving is popular. It’s a good choice for high-traffic outdoor spaces since it can withstand the elements.

Advantages of Block Paving Driveways
  • A durable surface that can withstand various weather situations in which significant snow is expected throughout the year. Other advantages are as follows:
  • It is reasonably priced
  • Block paving is simple to put up, and it requires just a spade, wheelbarrow, and concrete tamping rod to install.
  • We may use block paving for a wide range of projects for homeowners who want to enhance the appearance of their outdoor area because we may apply it over almost any surface layer.
The Block Paving Process

Pavements made from compacted gravel are often known as “paving above the ground” since they require laying an even surface of stone bricks or slabs on top of a compressed gravel foundation to create new parking lots, walkways, and sidewalks.

Generally, the substances used in making paved block areas are:

  • Natural stone.
  • Concrete pavers
  • Cobblestones
  • The bricks are set in a sand-cement mortar with an asphalt topping.

Block paving using pavers may be accomplished by hand, with one block component at a time. On the contrary, as a specialist block paving company, we employ sophisticated technologies to install them.

To generate a unified road surface, these systems build numerous levels of cement paver components on top of a prepared surface. This allows for faster installation and less laborious work than previous methods, lowering expenses.

  • Using a hammer drill machine to drill holes in hard ground
  • We begin by cleaning the area surrounding the hole with a washcloth or rag.
  • A chisel with a square tip is used to trim block edges to fit securely into the block.
  • A paintbrush applies sealant to cracks in the blocks and seams between the blocks’ surfaces.
  • A block cutting tool, a block extractor, and a block knife are all provided.
  • The sub-base is replenished with gravel using a trowel or other tool before block paving.
  • Wooden block spacers, also known as ‘bats,’ allow you to create tiny gaps between your blocks while placing them – this is crucial since it gives a more uniform appearance when they’re all finished!
Block Paving Installation Steps
  • We need to take readings, pick a site, and clean the area of any dirt particles before we begin.
  • Determining the optimal sub-base depth (generally about 17 cm below the surface)
  • Adding a thin layer of sand over the whole area where we will place the blocks
  • Before you begin constructing the first block, prepare wooden spacers; placing the second block against the preceding one, ensuring adequate space between them for the next column, and then adding spacers into the room we’ve made; continuing to work until all of the required blocks are placed.
  • We make sure there are gaps between each row.
  • As a result, we promise that the blocks are laid out in such a manner as to guarantee solidity. (We provide the correct number of blocks for your task and put them on-site to avoid problems.)
  • The bricks are compressed with an iron roller, used in a slow, uniform manner over the whole surface, rolling smoothly and not too violently to avoid damaging the bricks.
  • There won’t be any gaps between individual bricks once the block is compressed sufficiently, and tapping them together will result in a “clunk.”
  • Cementitious materials (blend) may be blended into the concrete combination (mixture) by gradually adding water until the desired equilibrium is obtained. This mix may be poured over block foundations and blocks stacked on top. If we want to create a pattern with the block, we use a mortar and pour it on top.
  • Spread the mortar with a hand trowel or masonry knife until it is about 1/2 inch thick. If you’re using more than one layer for your task, allow every block layer to dry before adding the next.
  • Position the block on a wet floor; any surplus mortar must permeate down into the holes between the bricks and level out over time as the weight of the other blocks compresses them.
  • Rows should be made from one edge to the other; if some have been established, begin at the other end and work your way forward.
  • To avoid trapped air and holes, push blocks firmly but not too hard against each other when laying them around. Block paving in the United Kingdom is a craft that requires attention to detail.
  • When assembling blocks, try to avoid producing compound edges.
  • Smooth out the joints by hand or with a shovel; if the surface is still bumpy, use corner-joining abrasives on the block corners. 

If you need help with anything else please feel free to call us on

020 xxxx xxxx